All recalls7,869 total
The Ultrasound-Guided Attenuation Parameter (UGAP) measurement data may display inaccurate values representing liver steatosis. This could potentially lead to inappropriate clinical decisions impacting overall care.
Potential for the lid of the catheter connector to be in the incorrect position.
Firm has received complaints regarding Anti-Reflux Valve (ARV) breakage due to excessive force during use. Firm is providing additional guidance for use. Expansion of RES 95214.
Potential for the lid of the catheter connector to be in the incorrect position.
Potential for the lid of the catheter connector to be in the incorrect position.
The Ultrasound-Guided Attenuation Parameter (UGAP) measurement data may display inaccurate values representing liver steatosis. This could potentially lead to inappropriate clinical decisions impacting overall care.
Potential for the lid of the catheter connector to be in the incorrect position.
Due to customer complaints, defibrillator pads may contain damage pins that disrupt the mechanical fit and electrical contact.
Potential for the lid of the catheter connector to be in the incorrect position.
Firm has received complaints regarding Anti-Reflux Valve (ARV) breakage due to excessive force during use. Firm is providing additional guidance for use. Expansion of RES 95214.
Undeclared sugar in finished product-primary package does not reflect the product inside bottle.
Contaminated with Listeria monocytogenes
Contaminated with Listeria monocytogenes
CGMP Deviations: Market complaints received for gritty texture (grainy)
Affected oral/axillary probes were inadvertently programmed with the rectal probe configuration. Affected probes will potentially display a lower temperature than the true value, which may lead to a delay in managing fever-related symptoms or infection.
Instructions for use for a foot plating system is being updated to remove the second option of requirements for sterilization which was 3 minutes exposure time at 134-137-degrees C (273-279-degrees F) and 40mBar for 5-10 minutes drying time, because these requirements do not apply in the United States.
IFU update; in-line valve, with pressure relief seal may leak when used with ventilator; don't use in neonates/infants, with target tidal volumes less-than50mL or less-than10kg- at high risk of cardiopulmonary/neurological compromise due to unrecognized hypoventilation, updates for continued use in others before design update; leak may cause respiratory acidosis, hypoxemia, or respiratory failure.
InSure ONE failed sensitivity testing when used with Test Card Lot T241102, which may result in false negative results.
When appending a care plan that contains one or more wave medication orders, the occurrence and frequency of the appended orders may not match the intended schedule.
Beckman Coulter has identified that there is an increased probability Synchron Systems Direct LDL Cholesterol (LDLD REF 969706) reagent lot M404166 may generate false high results. The issue was discovered internally and confirmed on August 19, 2025 by Beckman Coulter.
Product manufactured under insanitary conditions whereby it may have been contaminated with Cesium-137 (Cs-137)
Product manufactured under insanitary conditions whereby it may have been contaminated with Cesium-137 (Cs-137)
Potential contamination with heavy metal (Lead).
Undeclared allergen (wheat).
Subpotent Drug: Testing revealed there was no oxytocin in the IV bag.
Subpotent: During long term stability testing of Levothyroxine Sodium Tablets USP for 88 mcg, the assay content was observed below the approved specification range.
A software anomaly, under specific conditions when large rotational alignment values are applied in 2D Image Fusion, may lead to misalignment of any secondary image layer(s) to the primary image layer.
A software anomaly, under specific conditions when large rotational alignment values are applied in 2D Image Fusion, may lead to misalignment of any secondary image layer(s) to the primary image layer.
A software anomaly, under specific conditions when large rotational alignment values are applied in 2D Image Fusion, may lead to misalignment of any secondary image layer(s) to the primary image layer.
A software anomaly, under specific conditions when large rotational alignment values are applied in 2D Image Fusion, may lead to misalignment of any secondary image layer(s) to the primary image layer.
Potential for Automated Impella Controller (AIC) purge pressure issues due to purge retainer failures.
A software anomaly, under specific conditions when large rotational alignment values are applied in 2D Image Fusion, may lead to misalignment of any secondary image layer(s) to the primary image layer.
A software anomaly, under specific conditions when large rotational alignment values are applied in 2D Image Fusion, may lead to misalignment of any secondary image layer(s) to the primary image layer.
Due to two distinct issues: 1. During patient admission, patient demographic fields may default to those of a previously viewed patient. 2. Systems configured with Resting/Rhythm ECG functionality, under specific navigation conditions, test data intended for one patient may be saved under another patient's record
A software anomaly, under specific conditions when large rotational alignment values are applied in 2D Image Fusion, may lead to misalignment of any secondary image layer(s) to the primary image layer.
Expandable interbody system cage may loose height or collapse (loss of lordosis), which could result in migration, subsidence and/or neurological injury. Therefore, surgical technique and instructions for use will be updated to mitigate risk of loss of lordosis to occur.
Undeclared Tree Nut. The firm discovered that Hazelnuts was not listed in the allergen statement
Undeclared Tree Nut. The firm discovered that Hazelnuts was not listed in the allergen statement
Failed Dissolution Specifications.
Failed Tablet/Capsule Specifications
It was found that the shaft for mounting the X-ray tube unit on the support may break. In addition, it was found that the protective parts might not work effectively only when the shaft was broken while being operated toward the front while lifting.
Possible presence of stones in product
Possible presence of stones in product
Potential yeast contamination.
Possible presence of stones in product
Chemical Contamination: This recall has been initiated due to elevated levels of benzene that was discovered during post consume awareness with benzoyl peroxide products.
Chemical Contamination: This recall has been initiated due to elevated levels of benzene that was discovered during post consume awareness with benzoyl peroxide products.
Chemical Contamination: This recall has been initiated due to elevated levels of benzene that was discovered during post consume awareness with benzoyl peroxide products.